cane
New Member
Posts: 27
|
Post by cane on Sept 14, 2022 16:50:34 GMT
For my Braun folks I have what is probably a pretty dumb question. Is there any way a Braun machine can turn off once a disinfection cycle is ended, with the blue clock engaged, without it having successfully completed the disinfection? I don't care if the disinfection in "interrupted" and then started back up (ex. staff mistakenly pulls a concentrate wand out during the disinfect, will it only power down if the disinfection cycle completes all steps? I hope my wording makes sense. Thanks y'all.
Dang sorry Chuck I put this in the wrong discussion. Please move it to the Braun forum if possible.
|
|
|
Post by Chuck Weddle on Sept 14, 2022 17:24:22 GMT
I don't remember what conditions but I do know that the machine will timeout and shutdown if the auto off is activated.
|
|
|
Post by Admin on Sept 14, 2022 17:46:56 GMT
The machine must see a low level of conductivity and the temp must also not be too high. These settings are in TSM. Additionally, there is a "Sun/Moon" option in TSM under the Weekly Disinfection Program, it's awful. Don't use that. Use the Automatic weekly disinfection program and set everything in Therapy mode.
|
|