kyle
New Member
Posts: 39
|
Post by kyle on Nov 2, 2022 17:33:52 GMT
Yes will try that! Last resort for us then if a new Jumo doesn't work, I think we're back to square one
|
|
|
Post by Admin on Nov 2, 2022 18:09:32 GMT
Give it a go dude. Let us know.
|
|
|
Post by Admin on Nov 10, 2022 16:40:35 GMT
Any update on this? Any findings?
|
|
kyle
New Member
Posts: 39
|
Post by kyle on Nov 10, 2022 19:09:19 GMT
Hi guys, we just changed the Jumo module last night. Here is a quick update:
Jumo module set to mS/cm (reads 0 mS/cm on module)- RO panel reads 0 uS/cm Jumo module set to uS/cm (reads 6 uS/cm on module)- RO panel reads ridiculous 47 uS/cm
Thinking of changing the cable of the conductivity sensor outside the RO..
|
|
|
Post by Admin on Nov 10, 2022 20:32:24 GMT
I don’t think it’s the cable. It goes to the Jumo then the Jumo to the lt1 and from the lt1 to the cpu. Sounds like a setting issue
|
|
|
Post by Admin on Nov 10, 2022 21:19:14 GMT
You should see if you can contact Adam in the lab and send the JUMO back to him and have him check it out.
|
|
kyle
New Member
Posts: 39
|
Post by kyle on Nov 10, 2022 23:22:10 GMT
Already been contact with a Bbraun tech, he said he'll look into some settings. Will get back here again if there are any updates.
|
|
|
Post by Admin on Nov 11, 2022 2:16:36 GMT
Okay.
|
|
kyle
New Member
Posts: 39
|
Post by kyle on Nov 14, 2022 17:45:20 GMT
Talked to Bbraun tech and checked all the settings that they know of that is causing the problem, still didn't fix anything. Problem was escalated to Bbraun in Germany, looking to what will happen next..
|
|
kyle
New Member
Posts: 39
|
Post by kyle on Nov 19, 2022 12:00:04 GMT
Hello, the problem is already fixed. Talked to Adam from Bbraun tech support, he asked me to send him my Jumo module, he did a higher level calibration on it and told me that there was a binary output reading that was off that’s why it’s making the Jumo module and RO panel read differently.
|
|
|
Post by Admin on Nov 19, 2022 13:36:25 GMT
Thanks for posting your fix!
|
|
|
Post by Chuck Weddle on Nov 19, 2022 17:43:29 GMT
Now Adam is going to get an even BIGGER head!
|
|