|
Post by Alex on Mar 10, 2023 20:17:22 GMT
Hey guys having an issue with a T machine that will not intake bleach. No broken springs air anything but still rebuilt the pump. Still no intake so I just swapped it out with a new one . Then checked the drain valve and it’s working properly. Even switched out the actuator board just to rule that out and still no intake. No flow errors any ideas?
|
|
|
Post by dave74 on Mar 10, 2023 21:45:28 GMT
Is the acid pump pumping during bleach? Is your bleach container OK?
|
|
|
Post by Alex on Mar 10, 2023 22:09:45 GMT
Yeah when I put my hand on top of it you can feel it and the I thought it might have been the bottle but I’ve tried 2 different bottles and actually putting the spike in to the bleach bottle it’s self
|
|
|
Post by GGG on Mar 10, 2023 23:25:47 GMT
check for leaks in hydraulics. remove hydraulics and sit on a case of bleach and watch during chemical disinfect or heat disinfect for a leak.
|
|
pacnw
Full Member
Posts: 187
|
Post by pacnw on Mar 11, 2023 18:13:01 GMT
try a different power logic board. Quick and easy check and it has fixed this for me once or twice... good luck
|
|
max
New Member
Posts: 9
|
Post by max on Mar 12, 2023 21:45:39 GMT
Focus on the Acid pump and what controls it.
|
|