|
Post by Gator biomed on Aug 6, 2021 20:50:21 GMT
I have a machine that is giving a Heat Relay Test Fail alarm about 30 seconds into dialysis mode. Any thoughts on what is causing this? I have already replaced the Triac, 24 V relay, Heater switch, Bridge rectifier , and Power control board as part of another problem.
|
|
|
Post by Gator biomed on Aug 6, 2021 21:18:57 GMT
UPDATE: Replaced Power Logic Board with new one problem resolves
|
|
|
Post by gnurk on Aug 9, 2021 12:40:16 GMT
gator thanks for posting your fix
|
|
dan
New Member
Posts: 16
|
Post by dan on Feb 19, 2024 19:28:50 GMT
Looking for suggestions, I have a 6t (26000) hours, this is the first time I have seen this issues. I have followed everything in this post and still have same issue. Does anyone know of anything else I could try? Any information is greatly appreciated.
|
|
|
Post by gnurk on Feb 20, 2024 13:50:27 GMT
go thru ts guide they have a good section on power problems could be cables or motherboard
|
|