quilla
New Member
Life is Good.
Posts: 25
|
Post by quilla on Aug 2, 2023 15:02:32 GMT
Hello Folks, I troubleshooting a portable R.O milleniun the old type which is working properly but the conductivity display is not. I cannot see what is the conductivity on the LED display. Any thought. Thanks
|
|
|
Post by Chuck Weddle on Aug 2, 2023 16:13:12 GMT
We had display boards go bad that we got from a 3rd party that has stopped making them. I'm guessing that you're out of luck.
|
|
|
Post by dave74 on Aug 2, 2023 16:18:14 GMT
Don't you think it would be the display circuit board, part number 12312? There is a conductivity circuit board 12311, but if the display is just blank, I would think the display board.
I am talking old, old here.
|
|
quilla
New Member
Life is Good.
Posts: 25
|
Post by quilla on Aug 2, 2023 16:42:40 GMT
Chuck and Dave, I already swapped the board for a good known , and still not displaying the conductivity . Also I swapped the the cable that connected the conductivity board to the internal board, and the internal board and still not displaying the conductivity. At this moment the only fix left I have is swapping the last board that holds the power transformer. Any more thoughts. Thanks
|
|
|
Post by dave74 on Aug 2, 2023 18:29:49 GMT
Do you have any way of checking to see if power is actually going to the display board or checking continuity?
|
|
quilla
New Member
Life is Good.
Posts: 25
|
Post by quilla on Aug 2, 2023 20:07:48 GMT
Dave, Yes there is I will do it and get back to all with the feedback. Thanks
|
|