|
Post by ponderosabiomed on Jan 24, 2024 19:09:52 GMT
Hi there,
Any thoughts on using a low pressure air compressor to blow out card cage.
I’m concerned about the pressure/power & static discharge.
Have any of you used an air compressor for this purpose without issue over a long period of time?
It seems like it would be cheaper long term to use a compressor instead of canned air.
Thanks!
|
|
eric
Full Member
Posts: 111
|
Post by eric on Jan 24, 2024 19:22:09 GMT
Its kind of loud but i bought a rechargeable hand held dust blower. you can google it but it works pretty well and its only about 40 bucks on the low end or up to 150 on the high end. havent bought a can in over 2 years.
|
|
phillipashleyludlow
Full Member
01001000 01101001 00100000 01010011 01110100 01110101 01100110 01100110 00101110
Posts: 151
|
Post by phillipashleyludlow on Jan 24, 2024 22:36:29 GMT
honestly, its loud as all get out when its filling up, but we have little 6gal air compressors in all our shops to blow out dust, clean motors, etc. works well. if i think im gonna use it for the day i let it fill and turn it off. usually dont have to "refill" if im doing 2-4 motors and blowing out card cages for pms. Attachments:
|
|
|
Post by Just a BioMed on Jan 29, 2024 21:30:43 GMT
I have used an appliance tech vacuum/blower (AKA small Shopvac) for years without any issues. It has more air volume and less pressure for cleaning electronics. I have used it for the appliances, machines, ROs, TVs, and computers throughout the facility. It's also cost effective.
|
|
Icebonez
Junior Member
What is better - to be born good, or to overcome your evil nature through great effort?
Posts: 55
|
Post by Icebonez on Jan 30, 2024 13:16:02 GMT
I have used an appliance tech vacuum/blower (AKA small Shopvac) for years without any issues. To add to this, I have something similar I use for my personal gaming PC. I would recommend investing in an ESD vacuum that has both an intake/pull and an exhaust/push so you can swap tools around as needed. Air compressors will work, but you do need to be real careful with air pressure and ESD. I've personally never had any ESD issues but I have heard nightmare stories about people who have. For work purposes, I find that the compressed gas dusters you can get from Grainger or any local electronics store is more than sufficient for my PM cleanup.
|
|
BMF
Junior Member
Posts: 86
|
Post by BMF on Jan 31, 2024 16:57:45 GMT
Another concern with air compressors to be aware of is water. Condensation forms quickly inside the tank and if you don't have an external filter/dryer attached, you will be misting your electronics with air and water. Just be careful and add a filter/dryer if you use an air compressor.
|
|
phillipashleyludlow
Full Member
01001000 01101001 00100000 01010011 01110100 01110101 01100110 01100110 00101110
Posts: 151
|
Post by phillipashleyludlow on Jan 31, 2024 20:14:43 GMT
These seem to work pretty well, no issues yet.
|
|