|
|
Post by klperkins25 on Apr 15, 2024 10:02:34 GMT
I am changing a power logic board in the power supply. Thid is my first time doing so. How do I release the brown and light blue wires from the gray box at the bottom? It has heater labeled below it. There are two little white levers below this little gray box.
|
|
|
|
Post by neonblur on Apr 15, 2024 12:42:06 GMT
You have to push the lever down. Sometimes it takes some force. The last one I changed it took two of us, one to get it pushed down and one to get the wire into the new board. I'm sure when they put the machine together they have a special tool that makes it easier.
|
|
|
|
Post by gnurk on Apr 16, 2024 12:10:53 GMT
the board you are referring to is the power control board not the power logic board
|
|
|
|
Post by dave74 on Apr 16, 2024 12:56:11 GMT
Thanks for clarifying. I should have picked up on that when the OP said in the power supply.
|
|
