|
|
Post by ksilcox11 on Jun 13, 2024 14:10:49 GMT
Good day all,
I have a V-8 machine that I can't get the touch screen to work I replaced the screen and the board that the touch screen attaches to what else is there that could be causing this?
|
|
btech
Junior Member
Posts: 55
|
Post by btech on Jul 2, 2024 7:11:51 GMT
good morning, it might be related to the GX1 Motherboard. Check the com4 connector it is for the touch controller board.
|
|
|
|
Post by ksilcox11 on Jul 2, 2024 17:09:36 GMT
it turned out to be the mother board changed it and all is working on it now.
|
|
btech
Junior Member
Posts: 55
|
Post by btech on Jul 15, 2024 6:35:27 GMT
perfect. thank you for posting your fix
|
|
|
|
Post by dukamp on Aug 11, 2024 4:01:45 GMT
Good day all,
I have a dialog+ touch screen pointer that can’t be moved to the bottom right hand corner of the touch screen to select “exit windows”
Has anyone dealt with this problem before and what’s the best fix?
|
|
|
|
Post by Admin on Aug 11, 2024 16:53:52 GMT
Most likely the Touch Controller Board. Give that a look first.
|
|
|
|
Post by dukamp on Aug 17, 2024 12:24:40 GMT
Thank you…will give it a try.
|
|
carl
New Member
Posts: 24
|
Post by carl on Aug 28, 2024 12:35:44 GMT
Could also be build up of salt from staff wiping down touch screen with diluted bleach solution as they do in my clinics. It interferes with touch screen. May have to loosen monitor screws and use alcohol pad to clean buildup at edge of touchscreen and underneath rim of screen edge to clean salt/sludge buildup.
|
|
