|
|
Post by joey on Jul 5, 2024 14:36:40 GMT
I feel like I am missing something
Is there an easy/easier way to swap out the motherboard? At first glance it seems I have to get a tiny screwdriver and get in there with my sausage fingers and try to unscrew them all.
Thanks
|
|
|
|
Post by Chuck Weddle on Jul 5, 2024 14:40:10 GMT
The motherboard is easy....just a few screws. Are you sliding the drawer out?
|
|
|
|
Post by joey on Jul 5, 2024 15:22:53 GMT
How do you slide it out? I see screws to unscrew but I just don't see how it slides out
|
|
|
|
Post by joey on Jul 5, 2024 16:35:00 GMT
I ended up removing the bsl module and using a small screwdriver but it's not exactly friendly to my hands.
|
|
|
|
Post by Chuck Weddle on Jul 5, 2024 16:50:32 GMT
You're right, the top shelf doesn't slide. We use DCI and not BSL so we don't have that to deal with.
|
|
|
|
Post by SrCusEngr on Jul 5, 2024 19:17:07 GMT
<Chuck> Joey asked about removing the "BSW" motherboard, not the "BSL" module. The BSW is the motherboard in all 9.1E factory OEM machines.
<Joey> A small 1" 1/4" bit and an offset ratchet bit wrench has always worked for me. But large hands/fingers can be a problem. When you removed the BSL, you most likely destroyed the caps for the screws. Put some silicone sealant over those screws to prevent the bleach that the operators use when wiping down the machine from getting to the screws.
|
|
|
|
Post by joey on Jul 10, 2024 18:13:47 GMT
Thanks ! I did the silicone and we do not use bleach we use virex which is much nicer to the metal.
I ended up removing the bsl to make more room for my hands.
|
|
