|
|
Adimea
Dec 14, 2021 12:16:58 GMT
Post by Chuck Weddle on Dec 14, 2021 12:16:58 GMT
Does anyone's clinic use Adimea?
|
|
DTECH
New Member
Posts: 21
|
Adimea
Jan 12, 2022 14:16:15 GMT
Post by DTECH on Jan 12, 2022 14:16:15 GMT
yes we do over in the UK
|
|
|
|
Adimea
Jan 12, 2022 17:32:56 GMT
Post by qman213 on Jan 12, 2022 17:32:56 GMT
We have it. We just don't use it. If the Adimea data would flow into our EMR, I really think it would be a useful tool. I think we are too cheap to pay for the interface needed to collect it in our EMR.
|
|
btech
New Member
Posts: 43
|
Adimea
Jan 13, 2022 7:52:36 GMT
Post by btech on Jan 13, 2022 7:52:36 GMT
I think it is used a lot, maybe not as often in the US as in the rest of the world. I have heard that there will be an improvement of the ADIMEA. I dont know in which way they are going, but pretty sure there is something to come.
|
|
|
|
Adimea
Feb 18, 2022 0:24:59 GMT
via mobile
Post by SrCusEngr on Feb 18, 2022 0:24:59 GMT
Qman213, what kind of EMR are your machines connected to right now?
|
|
|
|
Adimea
Feb 18, 2022 17:42:50 GMT
Post by qman213 on Feb 18, 2022 17:42:50 GMT
We are using Infian (Formerly HII).
|
|
|
|
Adimea
Feb 18, 2022 18:44:25 GMT
Post by Chuck Weddle on Feb 18, 2022 18:44:25 GMT
qman, correct me if I'm wrong....
I think the problem is that the information doesn't cross over if you are using the DCI protocol that comes with the machine. If you want more than just the basic information to cross, you have to buy the module (I forget the name) that will allow the information to cross. This is what I was told when we were trying to get the MAP to cross over. If I remember correctly, the cost was about $600/machine.
|
|
|
|
Adimea
Feb 23, 2022 17:17:03 GMT
Post by qman213 on Feb 23, 2022 17:17:03 GMT
qman, correct me if I'm wrong.... I think the problem is that the information doesn't cross over if you are using the DCI protocol that comes with the machine. If you want more than just the basic information to cross, you have to buy the module (I forget the name) that will allow the information to cross. This is what I was told when we were trying to get the MAP to cross over. If I remember correctly, the cost was about $600/machine. Ouch! For us, that would be over $40K. Probably not going to happen. Thanks for the info. |
|
|
|
Adimea
Feb 23, 2022 19:18:02 GMT
Post by Chuck Weddle on Feb 23, 2022 19:18:02 GMT
qman, correct me if I'm wrong.... I think the problem is that the information doesn't cross over if you are using the DCI protocol that comes with the machine. If you want more than just the basic information to cross, you have to buy the module (I forget the name) that will allow the information to cross. This is what I was told when we were trying to get the MAP to cross over. If I remember correctly, the cost was about $600/machine. Ouch! For us, that would be over $40K. Probably not going to happen. Thanks for the info. Maybe one of the Braun guys will chime in (HINT) about what the module is called so you can check on it. |
|
|
|
Adimea
Mar 16, 2022 18:54:25 GMT
Post by BTech0056 on Mar 16, 2022 18:54:25 GMT
We use the Adimea feature, but I believe Braun only releases a certain amount of the supporting programming in Germany.
|
|
joey
Full Member
Posts: 228
|
Adimea
Mar 17, 2022 17:07:18 GMT
Post by joey on Mar 17, 2022 17:07:18 GMT
Ouch! For us, that would be over $40K. Probably not going to happen. Thanks for the info. Maybe one of the Braun guys will chime in (HINT) about what the module is called so you can check on it. I'd be interested to see what they have to say as well. We use Infian so it is definitely pertinent if we purchase Bbraun machines next. |
|
