|
Post by LowAl on Jul 2, 2021 15:06:37 GMT
Changed out the ethernet port on the back of a T machine, and the cable on tx floor, then the UI board, still no internet. Any tips?
|
|
|
Internet
Jul 2, 2021 17:43:18 GMT
via mobile
Post by lisagalvan on Jul 2, 2021 17:43:18 GMT
Did you by chance plug the cable into a neighboring internet plug?I have a couple bad wall plugs..just a thought?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 2, 2021 18:39:33 GMT
I did try that, no luck. I even pulled out a UI from a known working machine, no luck there either. I am going to try a wifi connector, after that, well.....motherboard?
|
|
|
Post by t1spike on Jul 2, 2021 19:43:30 GMT
I had a bad wifi connecter cause this problem last week kept getting a 110 error on chairside ,changed it out no problem now
|
|
|
Post by Salted_Peanuts on Jul 6, 2021 5:43:12 GMT
Agree with t1spike, same problem with no internet access, replaced the wifi usb
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 20, 2021 20:56:30 GMT
Thanks for the help, finally was able to swap out the wifi connector and that was the problem.
|
|
|
Post by gnurk on Jul 21, 2021 12:27:14 GMT
low thanks for posting your fix
|
|
|
Post by Stuff on Jul 22, 2021 10:32:36 GMT
i am curious why the wifi connector affects the ethernet cable. Seems like it should be 2 different things
|
|
|
Post by theladybio on Mar 2, 2023 16:09:20 GMT
j18 unplugged from ui/mics board worked for me ! thanks for the lead to this
|
|