|
|
Post by Biomed 304 on Mar 23, 2022 13:29:02 GMT
Anyone ever have this issue? I have called tech support they had me change function and sensor boards. I have changed both condo cells, temp sensors, done all calibrations ect. I am running within .1 of TCD so I cannot figure out for the life of me why it would fail this test. Does anyone have any suggestions? TIA!
|
|
|
|
Post by Imnotsure on Feb 15, 2024 14:11:11 GMT
I am having the same exact issue.
|
|
pacnw
Full Member
Posts: 187
|
Post by pacnw on Feb 15, 2024 15:35:43 GMT
the first thing I would do is calibrate the condo confirmation cell. This usually fixes the problem. If it doesn't fix the issue it could be several things. temp sensors, condo cells, sensor board, function board and cables to both....
|
|
|
|
Post by Guest123 on Feb 16, 2024 23:16:30 GMT
Are you on bibag?
|
|
|
|
Post by gnurk on Feb 18, 2024 13:15:46 GMT
is your cond actually what the meter says could be ntc3 or ntc 7
|
|
|
|
Post by dave74 on Feb 18, 2024 15:01:49 GMT
Please note that this thread was started two years ago. The OP never posted the fix.
|
|
|
|
Post by Chuck Weddle on Feb 18, 2024 15:07:36 GMT
Please note that this thread was started two years ago. The OP never posted the fix. Its odd that the OP never even got a reply. |
|
