|
|
Post by Benefica1 on Apr 26, 2022 15:57:50 GMT
An Acute nurse sent me a picture of the "SELECT PROGRAM " screen . On the light gray square under treatment options it has USB Recovery and USB Fail . Tech support didn't have much of an answer for me , except that it could be the one that connects to UMICS board or the one on the screen . Has anyone else ever come across this message ?
Thanks |
|
stuff
Full Member
1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
Posts: 229
|
Post by stuff on Apr 26, 2022 18:42:34 GMT
Just a dumb question; is there anything plugged in to any of the usb ports?(back and on side of screen).
Could be someone trying to charge their phone plugged up into the USB and then machine tried to boot up from the phone. Should also disable USB boot from the bios
also assuming this is a 2008T of some sort?
|
|
|
|
Post by Benefica1 on Apr 27, 2022 12:47:55 GMT
A clic device is normally plugged into the screen Usb port .
|
|
stuff
Full Member
1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
Posts: 229
|
Post by stuff on Apr 28, 2022 18:00:06 GMT
Unplug the CliC device and reboot machine see f error goes away
|
|
I don't have a name
Guest
|
Post by I don't have a name on Nov 14, 2022 18:21:23 GMT
Did you ever fix this. I am having this on startup and on home screen??
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 24, 2022 4:40:44 GMT
Anything plugged into the rs232 port?
|
|
