|
|
Post by Newbie2 on Jul 17, 2022 4:38:48 GMT
2008T 9T0S with about 12,000 hrs. Machine will alarm temp over 95 degrees during heat disinfect. Not every time. Turn machine off and back on will then give 24V Low alarm. Leave machine off couple hours and turn back on will go through heat disinfect no problem. Any help is appreciated.
|
|
|
|
Post by gnurk on Jul 17, 2022 15:12:21 GMT
sounds like a component is heating up and when you let it cool down it is alright check the ts guide under heat dis temp greater than 90
degrees could be power control board or triac or NYC 2
|
|
|
|
Post by gnurk on Jul 17, 2022 15:12:57 GMT
sorry ntc 2
|
|
|
|
Post by Rocket on Sept 12, 2022 15:58:27 GMT
I just had the exact same issue. Replacing the power supplies "power control board" (Part # 190019) seems to have fixed the issue for me.
|
|
