|
|
Post by Fresenius123 on Aug 10, 2022 13:48:04 GMT
A 2008T fresenius machine, PCT's are telling me two machines keep giving a "dialyzer connected?" pop up randomly during treatment.
Thanks
|
|
stuff
Full Member
1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
Posts: 240
|
Post by stuff on Aug 10, 2022 15:17:49 GMT
Are they putting the dialyzer caps on the hanson connection? Asking because i have seen this done and it causes hell on technical end chasing a ghost problem.
|
|
|
|
Post by t1spike on Aug 10, 2022 17:47:16 GMT
make sure your buttons on the shunt assembly are not torn off
|
|
|
|
Post by Fresenius123 on Aug 10, 2022 19:54:12 GMT
NO cap was placed on the Dialyzer.
|
|
|
|
Post by gnurk on Aug 11, 2022 12:24:50 GMT
check your shunt switch and your level detector are plugged into the motherboard securely
|
|
|
|
Post by Fresenius123 on Aug 11, 2022 16:13:23 GMT
I did. I called tech support and they informed me the shunt assembly might be bad
|
|
