|
|
Post by Guessed on Sept 5, 2022 15:05:16 GMT
I have a bluestar machine that needs a front display. The only display I have is a T display(pn#190844). I was wondering if that display is interchangeable with the bluestar?
|
|
|
|
Post by Chuck Weddle on Sept 5, 2022 15:13:01 GMT
Look up the part # for the Bluestar to see if they are the same.
|
|
|
|
Post by Guessed on Sept 5, 2022 15:34:16 GMT
They are not. Bluestar display is #191164. T display is #190844.
|
|
|
|
T display
Sept 6, 2022 10:52:00 GMT
via mobile
Post by anon’s face on Sept 6, 2022 10:52:00 GMT
They are not. Bluestar display is #191164. T display is #190844. What did Fresenius Customer Service say? |
|
|
|
Post by Chuck Weddle on Sept 6, 2022 11:00:02 GMT
My vote would be they are not interchangeable. I doubt even Fresenius would have 2 identical parts with different part numbers.
|
|
|
|
Post by Guest09 on Sept 8, 2022 18:56:12 GMT
Did you happen to get a response from FMC CS? Would like to know as well for future reference.
@chuck FMC definitely has the different part #'s for the same identical part. We all know they like to change part#'s and not let us know until we call about it a week or 2 later after we've been waiting with a down machine.
|
|
|
|
Post by ThereAreSomeWhoCallMeTim on Sept 8, 2022 22:29:58 GMT
Functionally they should be interchangeable. The only difference that I've seen between the 2 is that the Bluestar monitor has the Bluestar emblem etched onto the front. As we are currently upgrading all our machines over to Bluestar and putting the Bluestar emblem sticker on the monitors and keypads. Should have the same cables to plug into the function and UI/Mics board as the Bluestar upgrade does not change out either of those 2 boards.
|
|
mtw2
New Member
Posts: 47
|
Post by mtw2 on Oct 4, 2022 12:54:09 GMT
So I installed the new bluestar part number 191164 display, no difference that I noticed. Except it does Not even say Fresenius on the display edge whatsoever! Just plain boarder.
|
|
