Post by stuff on Oct 5, 2022 12:30:50 GMT
Someone on here once said they had a black screen but could tell the machine was booting up and working ok just the screen was really dark or black.
I had to fix this today and decided to take photos. I caused this issue myself by replacing a keyboard and unplugging as little wires as i could.
1. you will be working with 3 layers.
Layer one - the keyboard = keyb and mouse =M. Possible to leave them on, but i took it all off.
Layer #2 there are 4 total screws on this layer. 2 at the top and 2 hidden in those plastic tubes. To separate layers 2 and three I had to push down on the metal rectangles. They were stuck together for me
Layer 3 - finally to the treasure. The red black and white wire is unplugged from the port on the screen side. it is zip tied to the bigger wires but it still slips and unplugs
I had to fix this today and decided to take photos. I caused this issue myself by replacing a keyboard and unplugging as little wires as i could.
1. you will be working with 3 layers.
Layer one - the keyboard = keyb and mouse =M. Possible to leave them on, but i took it all off.
Layer #2 there are 4 total screws on this layer. 2 at the top and 2 hidden in those plastic tubes. To separate layers 2 and three I had to push down on the metal rectangles. They were stuck together for me
Layer 3 - finally to the treasure. The red black and white wire is unplugged from the port on the screen side. it is zip tied to the bigger wires but it still slips and unplugs
