|
|
Post by Bullfrogg on Dec 22, 2022 18:03:50 GMT
Check the inlet water pressure regulator. Mine was running high and I turned it down to 18. It has only been a couple hours of running now and several test, but it hasn't returned since. Did this for one with a V105 error and it seems to have cured that one too. My machines have around 4,500 hrs.
|
|
|
|
Post by Aventura on Dec 27, 2022 1:35:00 GMT
Thanks for all the ideas folks but the fix was.. the brand new bibag hydraulic assy had a poor connection inside the distribution box.
|
|
|
|
Post by DY8UGR on Dec 28, 2022 16:34:05 GMT
It happened to me many times (with Bluestar Premium machines only) and found out that Bicarb connector are not totally secured in the rinse port.
Once secured, rinse the machine and see if it will fix the issue. It did on my machines I worked on.
|
|
TheTDoc
New Member
Gotta fix em all
Posts: 31
|
Post by TheTDoc on Jan 13, 2023 4:15:19 GMT
i had this at a coworkers clinic, 10 techs came to take a whack at it and eventually the biomed just shotgunned it with almost every part in the hydraulics and something fixed it. unfortunately he did it all at once instead of trying parts one at a time so noone ever knew what was really the cause
|
|
|
|
Post by Jay on Jan 17, 2023 13:30:46 GMT
Did you end up resolving the issue? What did the troubleshooting guide say?
|
|
|
|
Post by Jay on Jan 17, 2023 13:32:14 GMT
Forgive me, I accidentally skimmed over where you said what the issue was.
|
|
|
|
Post by briancanufixthis on Feb 23, 2023 19:56:34 GMT
Did you check the acid loop pressure?
|
|
|
|
Post by Taco123 on Mar 3, 2023 18:15:00 GMT
Replacing the rinse ports fixed the issue for me or the wands.
|
|
