|
|
Post by yellow2green on Jan 11, 2023 18:50:14 GMT
is it possible to replace just the green light in the display. 2008t monitor has only the green light not working.
|
|
|
|
Post by Guest2day on Jan 11, 2023 20:30:08 GMT
Yes the led light can be replaced but FMC does not sell it. You can buy it from H&S, but be prepared to wait as they've been on backorder for sometime. Call them and check.
|
|
|
|
Post by yellow2green on Jan 11, 2023 20:55:44 GMT
H&S? I haven't used this vendor before sorry, and google has more than Im willing to search through. Do you have a H&S's full name, PN#, or some kind of contact info?
side note... is PN# right? or is it P#, or just PN?
|
|
|
|
Post by dave74 on Jan 11, 2023 21:28:42 GMT
|
|
|
|
Post by guest2day on Jan 13, 2023 0:04:50 GMT
H&S technical services, status light (LED) P/N:225402e. You will need to send in your bad one to them as an exchange.
|
|
|
|
Post by Phillip-Ashley Ludlow on Jan 20, 2023 15:25:36 GMT
is it possible to replace just the green light in the display. 2008t monitor has only the green light not working. just as a heads up, if you are a Fresenius facility, you are not allowed to swap out the green light with ones produced or procured through a 3rd party vendor, as it invalidates the certification, as was explained to our work group. we ended up getting new screens and swapping them out. |
|
|
|
Post by jimjamjr on Jan 20, 2023 20:35:53 GMT
The official Fresenius repair is "You need to spend $1500 to replace the whole display." The unofficial answer.. if you have another display that went bad for another issue, you can take that traffic light off that display and swap it with the other. but the wires connecting it are VERY thin. and VERY delicate. Be careful with it.
|
|
|
|
Post by jaretac on Jan 25, 2023 9:27:40 GMT
is it possible to replace just the green light in the display. 2008t monitor has only the green light not working. just as a heads up, if you are a Fresenius facility, you are not allowed to swap out the green light with ones produced or procured through a 3rd party vendor, as it invalidates the certification, as was explained to our work group. we ended up getting new screens and swapping them out. We have been parting old machines of their lights before sending them out. Something to think about If your filling out a de-1 |
|
|
|
Post by briancanufixthis on Sept 22, 2023 15:33:31 GMT
I save the lights when I change a screen. Part not available by itself. Gotta do what you gotta do sometimes....
|
|
|
|
Post by robertb on Sept 23, 2023 1:59:30 GMT
can't you replace the green LEDs on the existing board ?
|
|
|
|
Post by yellow2green on Sept 25, 2023 16:24:11 GMT
Not just the green one, no. But if you can get a failed screen and pull that light off you can replace it. otherwise you need to order a new display. If you feel like holding on to it when another fails you can take the light then. that's what i did. and I haven't had another display fail yet.
|
|
|
|
Post by Phillip-Ashley Ludlow on Jun 5, 2024 17:46:23 GMT
I just wanted to update this post:
The LED Light is now a Fresenius Aval part.
PN: 190522 ASSY, 2008T STATUS LIGHT BOARD
at the time of this post, they were roughly a'but 20$ a pop.
|
|
|
|
Post by 48yrshuntinbubbles on Jun 8, 2024 17:13:21 GMT
I just wanted to update this post: The LED Light is now a Fresenius Aval part. PN: 190522 ASSY, 2008T STATUS LIGHT BOARD at the time of this post, they were roughly a'but 20$ a pop. Thanks for that update |
|
dee
New Member
Posts: 2
|
Post by dee on Jun 12, 2024 19:11:08 GMT
Fresenius now sells the AMP lights through SAP. Part# 190522
|
|
|
|
Post by Phillip-Ashley Ludlow on Jun 14, 2024 16:57:43 GMT
Fresenius now sells the AMP lights through SAP. Part# 190522 is there an echo? |
|
