|
Post by Unknown2438 on Jan 24, 2023 19:16:34 GMT
Hello everyone!
I have a problem with calibrating Venous pressure. When pressurizing to 400, venous stays at 0. and get Operator error. I replaced LP950, transducers, and venous valve.
Same in dialysis mode.
|
|
|
Post by dave74 on Jan 24, 2023 20:42:32 GMT
Did you try swapping the venous module with a known good one to be sure the module is the problem?
|
|
|
Post by Unknown2438 on Jan 24, 2023 20:46:08 GMT
Yes, I swapped the venous module. The module is the problem.
|
|