|
Post by mrceniceros on Feb 17, 2023 16:59:54 GMT
We have a pHoenix meter that is not showing the pH or mS, they are just dashes and the temperature is displaying 'HI.' Does anyone have a quick fix for this issue? I've tried drawing solution, letting it dwell in bleach solution, changed out the battery. I don't want to send it off if I don't have to. Thank you. Attachments:
|
|
cane
New Member
Posts: 27
|
Post by cane on Feb 20, 2023 14:06:57 GMT
You can try a "master reset" of the meter. Put it into level 2, like you're going to calibrate it, and then hold down both arrows and the mode button at the same time. It will beep a few times and then default back to the same screen you have when you first power it up. If that doesn't work it'll have to go back.
|
|
|
Post by mrceniceros on Feb 20, 2023 18:49:18 GMT
Thank you Cane. Tried it and didn't work, looks like I need to send it in.
|
|