|
Post by mrceniceros on Feb 26, 2023 20:25:44 GMT
What is a good indication that I lost all of my calibrations?
I switch out a function board from my T machine, I took the EEPROM from the old board and put in the new function board. When I started it up, something seemed off about the machine with my Debug screens. I'm really hoping I didn't damage the EEPROM when I was switching it out.
|
|
|
Post by Bio on Feb 27, 2023 17:27:46 GMT
Make sure your board is updated to the current version you have. I would recheck the eeprom placement as well. Make sure you have all connections on correct.
|
|