Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 27, 2023 13:54:03 GMT
I have a 10yr old 2008k2 that when you place it in rinse after a few mins it will trip the outlet and shut off instantly. There is a random leak as well trying to tackle the power issue first then on to the leak. I have already swapped out Power logic board and the whole power supply. Trying the other boards today but if anyone has any feedback or have run into this problem before please let me know. Thanks
|
|
stuff
Full Member
1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
Posts: 239
|
Post by stuff on Feb 27, 2023 14:25:25 GMT
Unplug the flow motor and deareation motors. If it still trips the breaker turn off the heater maybe remove the heater rod from the power block. Check for pinched blue wires behind the UF pump.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 27, 2023 19:18:54 GMT
Unplug the flow motor and Deaeration motors. If it still trips the breaker turn off the heater maybe remove the heater rod from the power block. Check for pinched blue wires behind the UF pump. Thanks for the info, the heater rod might of been the culprit while a stuck valve was the cause of my random leak. Just a random issues I have never seen in the 11 years as a biomed tech. haha |
|
